Powered By Intepo USA
Powered By Intepo USA
Menu
Resiliency, continuity of operations and toughness of naval infrastructure, as well as rapid and reliable expeditionary IT networking, have never been more important than they are today. SNS technology represents not a step forward, but a leap forward in these critical areas.
Rear Admiral, USN-ret
Up to
240W
Total Power Output
Up to
60W
Power Output Per Port
Up to
90-264VAC 50/60Hz
Power Input
Up to
1400Wh
Standby Power
UPS SolidSwitch is made possible by SNS “Uninterruptible Power (over Ethernet) Supply”™. A disruptive technology that ensures a reliable and consistent power connection through a switching mechanism to an internal battery source, operating so efficiently, the transition is undetectable. In the creation of UPS SolidSwitch, we intended to add a new dimension to network infrastructure and were uncompromising it is design and engineering. In doing so we created a new standard to deliver what we believe is the most versatile, outdoor POE Switch, bringing UPS anywhere to ensure always on power everywhere.
At initial power up, the SolidSwitch microprocessor takes inventory of the internal emergency power sources and estimates the energy levels in each of the available resources. This estimate of each resource will be updated when the known status is achieved and will be re-evaluated every 1 second to sense changes and make adjustments to the available inventory.
The switching from an AC power source to the main backup battery pack is controlled by hardware, eliminating CPU latency and ensuring glitch free operation. Management of auxiliary power packs is handled by a microprocessor, which powers all ports until the battery resources are completely exhausted.
SolidSwitch provides the network capability to shut down selected devices or to program the orderly shutdown of devices when resources have been depleted to predetermined levels. Battery maintenance is also programmed into the device to ensure PowerPak life is maximized.
The SolidSwitch Command Post is a user interface designed to simplify the task of the system administrator.
ProTool is an all-inclusive, uniquely intuitive web based configuration and management tool with timed restart capabilities to ensure permanent changes are effected unmistakably. Instant PoE monitoring and controls report exact per port power consumption while simply enabling power recycling to edge devices on the fly. The sophisticated on board UPS and emergency backup is fully monitored twice per second to access real time mains power status, PowerPak charge status, capacity and estimated emergency runtime. Simplified management is provided through preconfigured VLAN tables and individual port membership.
► VLAN table management across all ports is used for VLAN membership and VLAN trunking on the uplink.
► Permanent VLAN (PVLAN) for all ports is used for tagging ingress traffic.
► Renumbering of the management interface is made possible with attachment to 1 of 4094 active VLANS if so required.
► 802.1X port-by-port basis (wired ports)
► SNMP V3 Support with SHA/MD5 AES/DES encryption options
► NTP with support for local time
► Radius
► TACACS+
► Full VLAN and QoS support
► Fast Link-up option to significantly reduce link-up time
► Auto-negotiation and Auto-MDI/MDI-X support
► 1000BASE-T/100BASE-TX/10BASE-Te IEEE 802.3 (Wired ports)
► 1000BASE-T/1000BASE-X/1000BASE-SX/1000BASE-LX (SFP)
► MIB counters (34 per port) for fully compliant statistics gathering
► IEEE 802.1X access control (Port and MAC address based)
► IGMP v1/v2/v3 snooping for multicast packet filtering
► IPv6 multicast listener discovery (MLD) snooping
► IPv4/IPv6 QoS support, QoS/CoS packet prioritization
► 802.1p QoS packet classification with 4 priority queues
► Broadcast storm protection
► Four priority queues with dynamic packet mapping for:
► IEEE 802.1p
► IPv4 DIFFSERV
► IPv6 Traffic Class
► MAC filtering function to filter/forward unknown uni-cast, multicast and VLAN packets
► Jumbo packet support up to 9000 bytes (configurable)
► Port mirroring/monitoring/sniffing with ingress and/or egress traffic to any port
The SNS-POE-PLUS model is also a UL497B Listed SPD designed to protect sensitive electronic equipment connected to a high wattage POE PLUS network from transient over-voltages. Typically this device is deployed in IEEE 802.3bt or POE+ applications with full duplex power solutions, i.e., power on all four (4) pairs. This device can pass up to 6Gbps of data transmission and are housed in a shielded enclosure with high quality RJ45 shielded jacks.
Copyright 2024, SOLVERE LTD. All Rights Reserved.
